PuriFog HYPO
The only fogging system to disinfect all surfaces and the air
- PuriFog HYPO cleans and hygienizes the air of 99.9% of viruses, bacteria, micro particle pollution and Covid-19.
- PuriFog HYPO disinfects the surfaces of 99.9% of viruses and bacteria including Covid-19.
- PuriFog HYPO complies to the WHO guidelines for killing Covid-19.
Designed to protect your health
PuriFog HYPO is the strongest version in the PuriFog range. Developed using all the latest guidelines issued by the World Health Organisation, to combat the present pandemic of COVID-19. The fog formulation contains 0.1% sodium hypochlorite strong enough to even disinfect all surfaces within a hospital plus deep clean and hygienizes the air of 99.9% of viruses bacteria microparticle pollution and Covid-19.
The PuriFog HYPO formulation follows the effectiveness indications issued by WHO and ISS that provides the effective treatment of surfaces in this pandemic.
PuriFog HYPO must not be breathed in, therefore workspaces homes and vehicles must be vacant while PuriFog HYPO is emitting fog and whilst the fog is present.
The PuriFog HYPO product range
PuriFog HYPO is available in a range of sizes with varying levels of dispensing capacity to suit premises of all shapes and sizes.
Talk to our installation team today to find out how PuriFog HYPO can protect your staff, employees and customers.
Need help selecting the correct size for your premises or just want to learn more about PuriFog HYPO and how it can protect you, your work-force and clients? Call us today on 01623 649013 or complete the form below and our installation team will be on hand to answer your questions.
How PuriFog HYPO Works
PuriFog HYPO is designed to clean and hygienize any professional or domestic environment with an estimated efficiency of more than 1700 times higher than a normal spray, due to the micron-sized sprayed droplets, that thanks to the uniform diffusion in the air, enabling it to reach all possible cracks, angles and surfaces (even vertical). This is due to the micron size fog droplets that uniformly disperse in the air, reaching all horizontal and vertical surfaces leaving nothing untouched.
Standard spray systems generally produce millimetre droplets that settle very quickly on horizontal surfaces and have a very low diffusion due to their size and weight. Therefore the likelihood of capturing particles suspended in the air is very low. As a result, it is extremely difficult to achieve a good hygienisation of the environment treated.
Captures all Airbourne Covid-19 in 30 seconds
The thermospray generated dipropyleneglycol/quaternary ammonium compounds aerosol Purifog apparatus, suggested for the capture of airborne infectious aerosols, has the number size distribution reported in Figure 3, if used at the suggested dose of 1 gram per cubic meter. The total concentration in the accumulation range (0.3 – 3 micron) is 1,109 particles cm-3 just after spraying. With this aerosol concentration the lifetime calculated is 3 seconds.
With these lifetimes, a potentially infecting population of particles with the concentrations reported above can be 99.9% captured by the propylenglycol/quaternary ammonium compounds aerosol in ten lifetimes, namely 30 seconds.
World Health Organisation Approval
Water, sanitation, hygiene, and waste management for the COVID-19 virus
Interim guidance – 23 April 2020
Environmental cleaning and laundry. Existing recommended cleaning and disinfection procedures for health-care facilities should be followed consistently and correctly.
34 Linen should be laundered and the surfaces where COVID-19 patients receive care should be cleaned and disinfected frequently (at least once a day), and after a patient is discharged. 23 Many disinfectants are active against enveloped viruses, such as the COVID-19 virus, including commonly-used hospital disinfectants. Currently, WHO recommends using: 70% ethyl alcohol to disinfect small surface areas and equipment between uses, such as reusable dedicated equipment (for example, thermometers); sodium hypochlorite at 0.1% (1000 ppm) for disinfecting surfaces35 and 0.5% (5000 ppm) for disinfection of blood or bodily fluids spills in health-care facilities.
Where does PuriFog HYPO sit in the sanitisation process?
Air cleaning and hygienizing
Shoot the Purifog HYPO and allow it to condense in the room. This will disinfect all areas of your premise including all horizontal and vertical surfaces, killing 99.9% of viruses and bacteria including COVID 19. Purifog HYPO is a dry fog and safe to use over, PCs, electronics, paperwork, clothing, furniture and leaves no visible residue. PPE must be worn.
